- Home
- ยป
- Our Product Range
- »
- Flexographic plate making
Flexographic plate making
Photopolymer Plate Making Machine
Minimum Order Quantity: 1 Unit
Product Brochure
Usage/Application | Industrial |
Brand | Innovative |
Automatic Grade | Automatic |
Power Source | Electric |
Voltage | 380 V |
Size | 42 x 60 inch (110 x 160 cm) |
Material | Stainless steel |
Frequency | 50/60 Hz |
FlexoBag is a brand new development of a Photopolymer Plate Making Machine for corrugated & paper printing industryThis innovative creation is experienced from both of conventional liquid photopolymer and solvent plate for 30 years.
FlexoBag is a faster exposure, with fine reproduction details, water wash-out, easy and rapid operation system. For a 4mm plate for corrugated board printing exposure time is only 5 min, wide latitude, fine details, no bubbles, tolerance within /- 0.03mm, good for all kids of flexo printing.
FlexoBag Plus drying and anti-tack treatment whole process for a 4 mm plate are less than 20 minutes. Your existing plate making machine is also good enough for this system, only a new double side exposure unit is required. Most important is that total plate making cost is only 50% of a solvent-wash photopolymer plate.
FlexoBag Water wash-out is the best advantage of this system, do not have to use solvent means less drying time, quick ready, saving cost from production and environmental green. Water washout time is only 3 min. for a 4mm plate.
Sealing Unit (BS): With instant and constant sealing results for the image size you required, to avoid the various stock for different gauges and dimensions.
Filling Unit (BF): With high-pressure air from your own air-compressor to fill in the photopolymer resin to the bag with no bubble for immediate plate making.
Recovering Unit (BR): With air-knife to clear off and collect the unhardened photopolymer in order for reuse, by this will also increase 10-20% of your production.
Exposure Unit: Double-size exposure anti-tack treatment unit (GT) with high-intensity lamps good for fine dot reproduction. With powerful air exhausting during it-tack treatment.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4WEEKS
- Packaging Details: Wooden Crates, Export Packaging
6mm Flexo Photopolymer Plate Making Machine
Minimum Order Quantity: 1 piece
Product Brochure
Automation Grade | Automatic |
Phase | Single Phase |
Brand | Innovative |
Usage/Application | Industrial |
Power Source | Electric |
Voltage | 220 V |
Size | 42 x 60 Inch (110 x 160 cm) |
Power Consumption | 100 Units/Unit per Month |
Material | Stainless Steel |
Flexo Bag is a brand new development of 6mm Flexo Photopolymer Plate Making Machine for corrugated & paper printing industryThis innovative creation is experienced from both of conventional liquid photopolymer and solvent plate for 30 years.
FlexoBag is a faster exposure, with fine reproduction details, water wash-out, easy and rapid operation system. For a 4mm plate for corrugated board printing exposure time is only 5 min, wide latitude, fine details, no bubbles, tolerance within /- 0.03mm, good for all kids of flexo printing.
FlexoBag Plus drying and anti-tack treatment whole process for a 4 mm plate is less than 20 minutes. Your existing plate making machine is also good enough for this system, only a new double side exposure unit is required. Most important is that total plate making cost is only 50% of a solvent-wash photopolymer plate.
@flexoBag Water wash-out is the best advantage of this system, do not have to use solvent means less drying time, quick ready, saving cost from production and environmental green. Water washout time is only 3 min. for a 4mm plate.
Sealing Unit (BS) :With instant and constant sealing results for the image size you required, to avoid various stock for different gauges and dimensions.
Filling Unit (BF) :With high pressure air from your own air-compressor to fill in the photo- polymer resin to the bag with no bubble for immediate plate making.
Recovering Unit (BR) :With air-knife to clear off and collect the unhardened photopolymer in order for reuse, by this will also increase 10-20% of your production.
Models :
@2436 (for plate size up to 24 x 36 inches = 60 x 90 cm)
@4260 (for plate size up to 42 x 60 inches = 110 x 160 cm)
Exposure Unit :Double-size exposure anti-tack treatment unit (GT) with high intensity lamps good for fine dot reproduction. With powerful air exhausting during atit-tack treatment.
SpecificationsExposing drying treatment
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4WEEKS
- Packaging Details: Wooden Crates, Export Packaging
4.7mm Flexo Photopolymer Plate Making Machine
Minimum Order Quantity: 1 piece
Automation Grade | Automatic |
Phase | Single Phase |
Usage/Application | Industrial |
Material | Stainless Steel |
Power Source | Electric |
Voltage | 220 V |
Size | 42 x 60 Inch (110 x 160 cm) |
Power Consumption | 100 Units/Unit per Month |
Brand | Innovative |
Frequency | 50/60 Hz |
- Plates suitable : DuPont / Cyrel,Ohkaflex, Flex-Light, Asahi / AFP, BASF / Nyloflex, JET.
- For printing : Label, film, paper, corrugated board, paper carton, knitting bag, Tetra pak etc.
- Exposure / Washout / Drying /Treatment (Light finishing) in complete functions.
Features of Exposure unit:
- Instant light up Philips high intensity lamps
- Unique digital timers for back/main exposure
- Excellent lamps cooling / exhausting system
- Quick vacuum drawdown pump with indicator
Features of Washout unit:
- Flat washout unit 3 in 1 for easy access
- Special bristle good for all kind plates wash
- Automatic control of temperature precisely
- Excellent result for 200 LPI 1% reproduction
Features of Drying unit:
- Drying drawer with uniform heat distribution
- Temperature adjustable by a precise controller
- Unique air circulation and exhaustion design
- Over heat sensor for safety and protection
Features of Treatment unit:
- Chemical free operation, simple, easy and save
- Digital timer for light finishing control
- Philips UVC high intensity lamps equipped
- With powerful air exhausting for big size models
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4WEEKS
- Packaging Details: Wooden Crates, Export Packaging