- Home
- ยป
- Our Product Range
- »
- Polymer Equipments
Polymer Equipments
Flexographic Plate Making System
Minimum Order Quantity: 1 piece
Product Brochure
Automation Grade | Automatic |
Phase | Single Phase |
Brand | Innovative |
Usage/Application | Industrial |
Power Source | Electric |
Voltage | 230 V |
Power Consumption | 100 Units per Month |
Material | Stainless Steel |
Frequency | 50/60 Hz |
FlexoBag Liquid Polymer Equipments is a faster exposure, with fine reproduction details, water wash-out, easy and rapid operation system. For a 4mm plate for corrugated board printing exposure time is only 5 min, wide latitude, fine details, no bubbles, tolerance within /- 0.03mm, good for all kids of flexo printing. Available size up to 42 x 60 inch (110 x 160cm), larger size equipment is available under your request.
FlexoBag Plus drying and anti-tack treatment whole process for a 4 mm plate is less than 20 minutes. Your existing plate making machine is also good enough for this system, only a new double side exposure unit is required. Most important is that total plate making cost is only 50% of a solvent-wash photopolymer plate.
FlexoBag Water wash-out is the best advantage of this system, do not have to use solvent means less drying time, quick ready, saving cost from production and environmental green. Water washout time is only 3 min. for a 4mm plate.
Sealing Unit (BS) : With instant and constant sealing results for the image size you required, to avoid various stock for different gauges and dimensions.
Filling Unit (BF) : With high pressure air from your own air-compressor to fill in the photo-polymer resin to the bag with no bubble for immediate plate making.
Recovering Unit (BR) : With air-knife to clear off and collect the unhardened photopolymer in order for reuse, by this will also increase 10-20% of your production.
Models :
@2436 (for plate size up to 24 x 36 inches = 60 x 90 cm) @4260 (for plate size up to 42 x 60 inches = 110 x 160 cm)
Exposure Unit : Double-size exposure anti-tack treatment unit (GT) with high intensity lamps good for fine dot reproduction. With powerful air exhausting during atit-tack treatment.
Washout Drying Unit : Flat water washout with recirculation & filtration Drying unit (WD) with built-in water heating, circulating and filtration system with sticky mounting during washout - no double side tape required.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4weeks
- Packaging Details: Wooden Crates, Export Packaging
Flexobag Printing Plate Machine
Minimum Order Quantity: 1 piece
Product Brochure
Phase | Single Phase |
Brand | Innovative |
Usage/Application | Industrial |
Material | Stainless Steel |
Power Source | Electric |
Voltage | 230 V |
Power Consumption | 100 Units/Unit per Month |
Measurement (cm) | 183 x 175 x 103 cm |
Model | 1600 EDT |
Net weight | 950 kg |
Gross weight | 1150 kg |
Power | 8 kW |
Photopolymer Flexo Printing Plate Machine offered are made available under Jumbo line for flexography under model @ 1600 EDT. These come with exposing, drying and treatment support and are made available in measurements the exposure unit is backed by Philips high-intensity lamps and also features vacuum drawdown pump with indicator support among other features.
Features:
- Machine made available under Jumbo line for flexography under model @ 1600 EDT
- Comes with support for exposing, drying and treatment support
- Exposure unit backed by Philips high-intensity lamps
- Exposure unit also features vacuum drawdown pump with indicator support
- Drying unit coming with option of uniform heat distribution
- Allows adjustments to be made to temperature by precise controller support
- Treatment unit providing for chemical-free operations
- Digital timer support also provided for light finishing control
Features of Exposure unit:
- Instant light up Philips high-intensity lamps
- Unique digital timers for back/main exposure
- Excellent lamps cooling / exhausting system
- Quick vacuum drawdown pump with indicator
Features of Drying unit:
- Drying drawer with uniform heat distribution
- Temperature adjustable by a precise controller
- Unique air circulation and exhaustion design
- Overheat sensor for safety and protection
Features of Treatment unit:
- Chemical free operation, simple, easy and save
- Digital timer for light finishing control
- Philips UVC high-intensity lamps equipped
- With powerful air exhausting for big size models
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: Ahmedabad
- Production Capacity: 100
- Delivery Time: 4 Weeks
- Packaging Details: Wooden Crates, Export Packaging
Flexo Equipment for Photopolymer
Minimum Order Quantity: 1 piece
Product Brochure
Automation Grade | Automatic |
Phase | Single Phase |
Brand | Innovative |
Usage/Application | Industrial |
Power Source | Electric |
Voltage | 230 V |
Size | 42 x 60 Inch (110 x 160 cm) |
Power Consumption | 100 Units/Unit per Month |
Material | Stainless Steel |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4weeks
- Packaging Details: Wooden Crates, Export Packaging
Flexo Plate Maker Machine
Minimum Order Quantity: 1 piece
Product Brochure
Automation Grade | Automatic |
Phase | Single Phase |
Brand | Innovative |
Usage/Application | Industrial |
Material | Stainless Steel |
Power Source | Electric |
Voltage | 230 V |
Model Name/Number | C-A2SSF |
Power Consumption | 100 Units/Unit per Month |
Measurement (cm) | 120 x 100 x 125 mm |
Net weight | 235 kg |
Gross weight | 335 kg |
Power | 2.8 kW |
Frequency | 50/60 Hz |
C-A2SSF Features:
- Exposing+drying+washout+treatment.
- With water circulation & filtration system.
- Simple operation, best plate result.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4WEEKS
- Packaging Details: Wooden Crates, Export Packaging
4 In 1 Photopolymer Plate Making Machine
Minimum Order Quantity: 1 Unit
Usage/Application | Industrial |
Brand | Innovative |
Model | A4 LT |
Automatic Grade | Automatic |
Material | Stainless Steel |
Power Source | Electric |
Voltage | 280 V |
Frequency | 50/60 Hz |
- Exposing+drying+washout+treatment.
- 4 in one design very compact.
- Simple operation, best plate result.
Features of Treatment unit:
- Chemical free operation, simple, easy and save
- Digital timer for light finishing control
- Philips UVC high intensity lamps equipped.
- With powerful air exhausting for big size models
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4weeks
- Packaging Details: Wooden Crates, Export Packaging
A3 SS Printing Plates Machine
Minimum Order Quantity: 1 Unit
Brand | Innovative |
Phase | Single Phase |
Usage/Application | Industrial |
Material | Stainless Steel |
Power Source | Electric |
Voltage | 230 V |
Automation Grade | Automatic |
Frequency | 50/60 Hz |
- Exposing+drying+washout.
- 3 in one design very compact.
- Simple operation, best plate result.
- The whole system includes exposing unit, washout unit, drying unit.
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
- Port of Dispatch: ahmedabad
- Production Capacity: 100
- Delivery Time: 4WEEKS
- Packaging Details: Wooden Crates, Export Packaging