- Home
- ยป
- Our Product Range
- »
- Distillation Units
Distillation Units
80 Ltr Solvent Distillation Unit
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | 100 Liters |
Design Type | Standard |
Usage/Application | For recycling all alternative solvents |
Material | SS+MS |
Size | 80ltr |
Machine Size | 130x88x130 |
Crate Size | 140x108x140 |
Net weight | 200Kg |
Country of Origin | Made in India |
Additional Information:
- Item Code: 80ltr
- Delivery Time: 4 to 6 Working Week
Acetone Recycling Machine
Product Brochure
Type | Acetone recycling machine |
Automation Grade | Fully Automatic |
Motor Power | 220vac 5.65Kw |
Voltage | 220 |
Product Dimension | 130x88x130 |
Weight | 200kg |
I Deal In | New Only |
Installation Service | Yes |
Country of Origin | Made in India |
With the assistance of our deft team of professionals, we are able to present a broad array of 5.65 kW Recycling Machine. This machine assists in distillation the chemical components and substances from the plate, rod and other equipment. The offered machine can clean entire types of solvent from the chemically dip plates. Moreover, the control panel and one production line assist in incrementing the product supply in a unit. Apart from it, clients can get the unit from us at industry leading rates.
Features:
- High power consumption
- Easy stages for quick production
- Less noise
General description:
- This is designed for recovery of flexographic photopolymer plate solvent washout chemical and any environmental green chemical with specialties of distilling and cooling can be connected with in-line processor and any plate washout machine directly. With cold air circulation and drain out of residue for high speed recovery. Super recovering rate in the shortest time, is an ideal and high efficient recovery unit for flexographer.
Operating steps:
- After opening the crate, plug in 220 V power, and connect the ground (earth).
- Open the lid and fill the tank up to the level with solvent to be recovered (80 L)
- Close the lid and tighten it.
- Check all the pipe / hose make sure it is well connected. Especially vacuum pipe (6) and fresh come-out pipe (1).
- Set up the thermostat(18) for example for Perc.is 150 degree C, for green chemical is 160-210 degree C. Vacuum tank pressure(3) high at 0.03 Mpa / low at 6.01Mpa, and steam cooling fan thermostat(11) at 40 degree C.
- Turn on the power switch (15), steam cooling switch (16), heater switch (17) and vacuum pump switch (12).
- If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer (14) then turn on the switch (13).
Important:
- Install the unit in a wide and ventilated place.
- Disconnect electric power before doing any action.
- No taking off the control panel
- Change the diathermic oil every 1000 working hours.
- No filling the solvent container up over the level (80 liters)
- Remove the waste after every recovery process
Butanols recycling machine
Minimum Order Quantity: 1 Piece
Product Brochure
Grade Standard | Chemical Grade |
Usage/Application | Chemical Synthesis |
Physical State | Liquid |
Weight | 300 Kg |
Country of Origin | Made in India |
Features:
- High quality recycled solvent
- Clean and pure supply to the production line
- Durable and stable performance
Other Details:
- Install the unit in a wide and ventilated place.
- Disconnect electric power before doing any action.
- No taking off the control panel
- Change the diathermic oil every 1000 working hours.
- No filling the solvent container up over the level.
- Remove the waste after every recovery process
Operating Steps:
- After opening the crate, plug in power, and connect the ground earth.
- Open the lid and fill the tank up to the level with solvent to be recovered
- Close the lid and tighten it.
- Check all the pipe hose make sure it is well connected. Especially vacuum pipe and fresh come-out pipe.
- Set up the thermostat for example for Perc.is 150 degree C, for green chemical. Vacuum tank pressure high at 0.03 Mpa low at 6.01Mpa, and steam cooling fan thermostat at 40 degree C.
- Turn on the power switch, steam cooling switch, heater switch and vacuum pump switch.
- If you want to be controlled with timer, it depends on the quantity of the chemical, set up the timer then turn on the switch.
Additional Information:
- Production Capacity: 100Ltr
- Delivery Time: 6 to 8 Working Weeks